Avaya 9608 Administrator's Manual page 32

Network Requirements
Note:
Often, the phones use ports defined by IETF or other standards bodies.
For more information about parameters and settings, see
323 Deskphones on page 67.
Table 4: Received packets (Destination = 9600 Series IP deskphone)
Destination port
The number used in the Source
Port field of Qtest packets sent by
the phone
22
The number used in the Source
Port field of DNS packets sent by
the phone
The number used in the Source
Port field of the packets sent by the
HTTP client on the phone
Release 2.0+ = PUSHPORT
Pre-Release 2.0 = 80
500, 2070, or 4500
The number used in the Source
Port field of received SSO packet
18414
546
The number used in the Source
Port field of the TLS/SSL packets
that are sent by the HTTP client on
the phone
68
161
500
1024 – 5000 (ephemeral port
selected by O/S)
1720
49,300 – 49,309
2048 – 3029
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
32
Administering Options for 9600 Series H.
Source port
7 Received Qtest messages
Any Packets received by the SSH
server of the phone
Any Received DNS messages
Any Packets received by the HTTP
client on the phone
Any Packets received by the HTTP
server of the phone
500 or 4500 Received IKE or IPsec
messages (if NVIKEOVERTCP
is 1 or 2)
Any Received SSO commands
Any Received DHCPv6 messages
Any TLS/SSL packets that the HTTP
client receives on the phone
Any Received DHCP messages
Any Received SNMP messages
Any Received DHCPv6 messages
Any Received Traceroute, HTTPS,
HTTP messages
Any Received H.323 signaling
messages
Any Received RAS messages
Any Received RTP, RTSP, SRTP,
and SRTCP messages
Comments? infodev@avaya.com
Use UDP or TCP?
UDP
TCP
UDP
TCP
TCP
TCP
TCP only
UDP
TCP
UDP
UDP
UDP
UDP
TCP
UDP
UDP
June 2014