Station Administration; Administering Features - Avaya 9608 Administrator's Manual

Communication Manager Administration
Name

Station administration

Administer the following station features on the Station form. The Station form comprises of several
pages. You must set the features covered in this section to optimize the user interface.
®
With Avaya Aura Communication Manager Release 4.0 and later, you can perform central call
server administration of the GROUP parameter on a station-by-station basis. This parameter is then
downloaded to each applicable deskphone starting with the next deskphone boot-up. You can use
the GROUP Identifier with the 46xxsettings file for administration of specific groups of deskphones.
For more information, see
You can administer the GROUP ID parameter on page 3 of the Change Station Form.
If applicable, before administering stations ensure that the deskphones are aliased according to the
chart for Aliasing IP Deskphones for switch compatibility

Administering features

Administer the following Station Features for maximum user experience:
Name
Enhanced Conference Features
Auto select any idle appearance
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
46
Using the GROUP parameter to set up customized groups
Comments? infodev@avaya.com
Description
IP phones. Calls that involve three or more parties,
even if all parties use 96xx IP phones, do not use
wide band. Calls between two 96xx IP phones where
audio is terminated at a port network/gateway
(PN/GW) media resource will not use wideband.
Ensure that G.722 is added to all codec-sets that can
possibly be used between all regions on the IP-
Network Regions form where 96xx IP phones exist.
Technically, G722 does not need to be first. What is
needed, however, is that all the non media
processor-supported codecs (G722, SIREN, etc.) be
placed before the media processor-supported
codecs (G711, G729, G726, G723).
For information on using the wideband codecs with
the Communication Manager, see Administering
®
Avaya Aura Communication Manager, 03-300509.
on page 22.
Description
Administer Conf-dsp (conference display) on the
station form as a feature button. Users gain the
benefits of enhanced conference features.
Set Auto select any idle appearance to N (no) to
optimize answering calls.
on page 66.
June 2014