Cables And Printers Used With The Interface Port - AEMC 6250 User Manual

5.3
The DB9 interface port can be used to trigger remote measurements
("TRIG"). Wiring for remote triggering of a test is detailed in Figure 5-2.
The "READY" LED indicates that a measurement can be made.
The DB9 interface port can be used for RS-232 communication with a PC,
terminal or a printer. The main connection pins used are detailed in Figures
5-3 and 5-4 respectively.
Connection to a PC or Terminal:
Micro-Ohmmeter Model 6250
0.561.8187

Cables and Printers Used with the Interface Port

2
3
5
Male Connector
Printer end
R
x
T
x
Gnd
www.
Figure 5-2
Figure 5-3
Female Connector
Printer end
Pin 6250 end
2
3
5
.com
2
3
5
3 T
x
2 R
x
5 Gnd
information@itm.
43