Measuring Resistance On Electric Motors; Battery Strap Measurements - AEMC 6250 User Manual

8.2

Measuring Resistance on Electric Motors

For this test, Kelvin probes should be used (Figure 8-2). Make contact
with each segment on the motor commutator. Allow approximately two
seconds for the display to stabilize.
8.3

Battery Strap Measurements

Proper battery strap resistance measurements will help ensure proper
voltage output. The resistance on battery strap connections should be
measured using the Kelvin probes (see Figure 8-3). Measurements must
be made with the system power turned off.
The average resistance of all the intercell connections should be
determined by totaling the individual resistances and dividing by the
number of connectors. Each individual cell resistance should not exceed
the average by more than 10%. See the manufacturer's specifications for
typical resistance values.
56
0.561.8187
Battery Battery
www.
Figure 8-2
Figure 8-3
.com
Micro-Ohmmeter Model 6250
information@itm.