Table of Contents
Advertisement
ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
2-18.10 DSCP Classification
The section describes to teach user to configure and allows you to map DSCP value to a QoS
Class and DPL value. Others the settings relate to the currently selected stack unit, as
reflected by the page header.
Web Interface
To configure the DSCP Classification parameters in the web interface:
1.Click Configuration, QoS, DSCP Translation
2. Scroll to set the DSCP Parameters
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 2-18.10: The DSCP Classification Configuration
Parameter description:
QoS Class :
Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped to followed
parameters.
DPL :
Drop Precedence Level (0-1) can be configured for all available QoS Classes.
DSCP :
Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS Class
and DPL value
Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh):
You can click them for refresh the DSCP Classification information by manual.
www.ot-systems.com
180
Ver.1.0
Advertisement
Table of Contents
