2-11.2.3 Port Group Filtering - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

2-11.2.3 Port Group Filtering

The section describes that you could to set the Port Group Filtering in the MLD Snooping
function. On the UI that you could add new filtering group and safety policy.
Web Interface
To configure the MLD Snooping Port Group Configuration in the web interface:
1. Click Configuration, IPMC, MLD Snooping, Port Group Filtering Configuration
2. Click the Add new Filtering Group
3. Specify the Filtering Groups with entries per page.
4. Click the Apply to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values
Figure 2-11.2.3: The MLD Snooping Port Group Filtering Configuration
Parameter description:
Port :
The logical port for the settings
Filtering Profile :
Select the IPMC Profile as the filtering condition for the specific port. Summary about the
designated profile will be shown by clicking the view button.
Profile Management Button :
You can inspect the rules of the designated profile by using the following button:
List the rules associated with the designated profile.
:
Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
www.ot-systems.com
.
133
Ver.1.0