3-9.2 Mvr Channels Groups - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

3-9.2 MVR Channels Groups

The section describes user could display the MVR Groups detail information on the switch.
Entries in the MVR Group Table are shown on this page. The MVR Group Table is sorted first
by VLAN ID, and then by group
Web Interface
To display the MVR Groups Information in the web interface:
1. Click Monitor, MVR, Groups Information
2. If you want to auto-refresh the information then you need to evoke the "Auto-refresh".
3. To Click the " Refresh" to refresh a entry of the MVR Groups Information.
4. Click "<< or >> " to move to previous or next entry.
Figure 3-9.2: The MVR Groups Information
Parameter description:
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the MVR Channels (Groups) Information Table.
The "Start from VLAN", and "Group Address" input fields allow the user to select the starting
point in the MVR Channels (Groups) Information Table. Clicking the button will update the
displayed table starting from that or the closest next MVR Channels (Groups) Information
Table match. In addition, the two input fields will - upon a button click - assume the value of the
first displayed entry, allowing for continuous refresh with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the button to
start over
MVR Channels (Groups) Information Table Columns
VLAN ID :
VLAN ID of the group.
Groups :
Group ID of the group displayed.
Port Members :
Ports under this group.
Buttons
www.ot-systems.com
269
Ver.1.0