Mini-Gbic Combo Port - OTS ET8122P Series Quick Start Manual

Unmanaged industrial 8-port 10/100base-tx + 2-port 10/100/1000t/fx sfp combo ethernet switch with poe/pse

ET8122P Series

Unmanaged Industrial 8-port 10/100Base-TX + 2-Port 10/100/1000T/FX SFP Combo Ethernet

Switch with PoE/PSE

Mini-GBIC combo port:

2 auto-detect Giga port—UTP or fiber. The gigabit Ethernet ports are hared with the mini-GBIC ports. UTP (Gigabit Ethernet) ports can

operate in half/full-duplex modes and work at speeds of 10/100/1000Mbps that support auto-sensing technology to enable each port to detect

the connecting speed. The mini-GBIC port is a joint for a mini-GBIC (SFP) transceiver, so the switch can be uplinked through fiber to another

one.

Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and the link partner (switch,

hub, workstation, etc.) must be less than 100 meters (328 ft.) long.

Use the mini-GBIC ports to uplink to another switch by inserting the mini-GBIC (SFP) transceiver.

Table of Contents