Factory Defaults - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

5-2 Factory Defaults

This section describes how to reset the Switch configuration to Factory Defaults. Any
configuration files or scripts will recover to factory default values.
Web Interface
To configure a Factory Defaults Configuration in the web interface:
1. Chick Factory Defaults.
2. Click Yes.
Figure 5-3.1: The Factory Defaults
Parameter description:
Buttons:
Yes – Click to "Yes" button to reset the configuration to Factory Defaults.
No- Click to to return to the Port State page without resetting the configuration.
www.ot-systems.com
314
Ver.1.0