Table of Contents
Advertisement
ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
About This Manual
Copyright
.
Purpose
Audience
CONVENTIONS
Disclaimer
FCC Warning
www.ot-systems.com
Copyright © 2015 Manufacture Technology Corp. All rights reserved.
The products and programs described in this User's Manual are licensed
products of Manufacture Technology, This User's Manual contains proprietary
information protected by copyright, and this User's Manual and all
accompanying hardware, software and documentation are copyrighted. No
parts of this User's manual may be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable from by
any means by electronic or mechanical. Including photocopying, recording, or
information storage and retrieval systems, for any purpose other than the
purchaser's personal use, and without the prior express written permission of
Manufacture Technology.
This manual gives specific information on how to operate and use the
management functions of the ET42202M-S-PD
The Manual is intended for use by network administrators who are
responsible for operating and maintaining network equipment; consequently,
it assumes a basic working knowledge of general switch functions, the
Internet Protocol (IP), and Simple Network Management Protocol (SNMP).
The following conventions are used throughout this manual to show
information.
Manufacture Technology does not warrant that the hardware will work
properly in all environments and applications, and marks no warranty and
representation, either implied or expressed, with respect to the quality,
performance, merchantability, or fitness for a particular purpose. Manufacture
disclaims liability for any inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change without notice and
does not represent a commitment on the part of Manufacture. Manufacture
assumes no responsibility for any inaccuracies that may be contained in this
User's Manual. Manufacture makes no commitment to update or keep
current the information in this User's Manual, and reserves the righter to
make improvements to this User's Manual and /or to the products described
in this User's Manual, at any time without notice.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the Instruction manual, may cause harmful
interference to radio communications.
ii
Ver.1.0
Advertisement
Table of Contents
