3-5.2.5 Ip Source Guard - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
Parameter description:
Navigating the ARP Inspection Table :
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the Dynamic ARP Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow the user to
select the starting point in the Dynamic ARP Inspection Table. Clicking the button will update the
displayed table starting from that or the closest next Dynamic ARP Inspection Table match. In addition,
the two input fields will - upon a button click - assume the value of the first displayed entry, allowing for
continuous refresh with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When the end
is reached the text "No more entries" is shown in the displayed table. Use the button to start over.
Port :
Switch Port Number for which the entries are displayed.
VLAN ID :
VLAN-ID in which the ARP traffic is permitted.
MAC Address :
User MAC address of the entry.
IP Address :
User IP address of the entry.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.
|<<: Updates the system log entries to the first available entry ID.
>> : Updates the system log entry to the next available entry ID.

3-5.2.5 IP Source Guard

Entries in the Dynamic IP Source Guard Table are shown on this page. The Dynamic IP
Source Guard Table is sorted first by port, then by VLAN ID, then by IP address, and then by
MAC address.
Web Interface
To configure a Dynamic IP Source Guard Table Configuration in the web interface:
www.ot-systems.com
243
Ver.1.0