Page 1
Switch of choice for harsh environments. Overview The ET4222H-S-DR product is a Self-Configured Hardened Ethernet switch which provides 4 port 10/100/1000Base-T + 2 port 1000Base-X SFP. SFP ports to support the use of SFP (Small Form-factor Pluggable) transceiver module. User can chose different types of SFPs (1000M only). The Switch supports 1 or 2 core Single-mode or Multi-mode fiber.
ET4222H-S-DR Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch Left Side view Installation SFP Optical Module You can select different SFP modules as required (Please refer to our SFP Ordering Options for the appropriate module). To insert/remove the SFP, the procedures are as follows: 1.
ET4222H-S-DR Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch DIN Rail Installation ET4222H-S-DR can be installed on a DIN rail. Installation steps are as follows: Hook Locking Slide 1. Put the switch close to the 2. Press the switch until 3.
Connect the ET4222H-S-DR to the power supply. Ensure the power supply in connected to a power source and the PWR indicator is ON. If not, please ensure that the power cable is connected properly and the power supply is functioning normally.
ET4222H-S-DR Hardened IP CCTV Self-Configured 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch LED Indicators Indicator Color Status Description Green Powered on Green Powered on Green Alarm contact close when either of the power supplies is off Fiber link up...