5-4.2 Upload - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

5-4.2 Upload

The configuration upload function will be backuped and saved configuration from the switch's
configuration into the running web browser PC.
It is possible to upload any of the files on the switch to the web browser. Select the file and
click Upload of running-config may take a little while to complete, as the file must be prepared
for upload.
Web Interface
To upload configuration in the web interface:
1. Chick Browser to select Maintenance/Configuration in you device.
2. Click upload Select.
Figure 5-4.2: Configuration upload
There are three system files:
1. running-config: A virtual file that represents the currently active configuration on the switch.
This file is volatile.
2. startup-config: The startup configuration for the switch, read at boot time.
3. default-config: A read-only file with vendor-specific configuration. This file is read when the
system is restored to default settings.
Parameter description:
Buttons :
Upload Configuration: Click the "Upload" button then the running web management PC
will start to upload the configuration from the managed switch configuration into the location
PC, user can configure web browser's upload file path to keep configuration file.
www.ot-systems.com
Browse...
318
Ver.1.0