2-23.2 User Link Management - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
Server State :
Report network information between Switch and Server.
Link Option :
Indicates the Link Option operation.
When the Link Option in Automatic, enabling applications to access the services provided by an UPnP
"Internet Gateway Device (IGN)" present on the network.
When the Link Option in Manual, you should Setting External Port and Your IGN/NAT's Port Forward
function by Manual.
When Link function working success, Mobile(s) can access this NAT by Internet.
Possible modes are:
Automatic: Link Option in Automatic.
Manual: Link Option in Manual.
Link State :
Report network information between Switch and Internet Gateway Device (IGN).
External Port :
When the Link Option in Manual, you should Setting External Port.
Internal Port :
Information about iSwitch Client's Internal Port.
Protocol :
Information about iSwitch Client's Protocol.
Destination IP :
Information about Client's Destination IP.

2-23.2 User Link Management

Configure User Link Management on this page.
Web Interface
To configure User Link Management in the web interface:
1. Click Configuration, Switch2go and and User Link Management.
2. Set the parameters
3. Click Get Activity Code.
Figure 2-23.2: The User Link Management
www.ot-systems.com
201
Ver.1.0