Other Info - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
Pending
Tx
Requests
Tx Timeouts

Other Info

This section contains information about the state of the server and the latest round-trip time.
Name RFC4668 Name
-
IP Address
-
State
Round-Trip radiusAuthClientExtRoundTri
pTime
Time
RADIUS Accounting Statistics
The statistics map closely to those specified in RFC4670 - RADIUS Accounting Client MIB.
Use the server select box to switch between the backend servers to show details for.
Packet Counters
RADIUS accounting server packet counter. There are five receive and four transmit counters.
Direction Name
Rx Responses
Malformed
Rx
Responses
Rx
Bad
www.ot-systems.com
radiusAuthClientExtPendingR
equests
radiusAuthClientExtTimeouts
IP address and UDP port for the authentication server in
question.
Shows the state of the server. It takes one of the following
values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is not
yet up and running.
Ready: The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept access
attempts.
Dead (X seconds left): Access attempts were made to this
server, but it did not reply within the configured timeout. The
server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
The time interval (measured in milliseconds) between the most
recent Access-Reply/Access-Challenge and the Access-Request
that matched it from the RADIUS authentication server. The
granularity of this measurement is 100 ms. A value of 0 ms
indicates that there hasn't been round-trip communication with
the server yet.
RFC4670 Name
radiusAccClientExtResponses
radiusAccClientExtMalformedR
esponses
radiusAcctClientExtBadAuthenti The number of RADIUS packets
249
The number of RADIUS Access-Request
packets destined for the server that have not yet
timed out or received a response. This variable
is incremented when an Access-Request is sent
and decremented due to receipt of an
Access-Accept, Access-Reject,
Access-Challenge, timeout, or retransmission.
The number of authentication timeouts to the
server. After a timeout, the client may retry to
the same server, send to a different server, or
give up. A retry to the same server is counted as
a retransmit as well as a timeout. A send to a
different server is counted as a Request as well
as a timeout.
Description
Description
The number of RADIUS packets (valid
or invalid) received from the server.
The number of malformed RADIUS
packets received from the server.
Malformed packets include packets with
an invalid length. Bad authenticators or
unknown types are not included as
malformed access responses.
Ver.1.0