Lldp; 3-11.1 Neighbour - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

3-11 LLDP

3-11.1 Neighbour

This page provides a status overview for all LLDP neighbours. The displayed table contains a
row for each port on which an LLDP neighbour is detected. The columns hold the following
information:
Web Interface
To show LLDP neighbours:
1. Click Monitor, LLDP, Neighbours.
2. Click Refresh for manual update web screen
3. Click Auto-refresh for auto-update web screen
Figure 3-11.1: The LLDP Neighbours information
Parameter description:
Local Port :
The port on which the LLDP frame was received.
Chassis ID :
The Chassis ID is the identification of the neighbour's LLDP frames.
Port ID :
The Remote Port ID is the identification of the neighbour port.
Port Description :
Port Description is the port description advertised by the neighbour unit.
System Name :
System Name is the name advertised by the neighbour unit.
System Capabilities :
System Capabilities describes the neighbour unit's capabilities. The possible capabilities
are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
www.ot-systems.com
If your network without any device supports LLDP
N :
OTE
then the table will show "No LLDP neighbour information
found".
285
Ver.1.0