Table of Contents
Advertisement
ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
2-10MVR
The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast
television application, a PC or a television with a set-top box can receive the multicast stream.
Multiple set-top boxes or PCs can be connected to one subscriber port, which is a switch port
configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or
PC sends an IGMP join message to Switch A to join the appropriate multicast. Uplink ports
that send and receive multicast data to and from the multicast VLAN are called MVR source
ports.
Web Interface
To configure the MVR Configuration in the web interface:
1. Click Configuration, MVR, Configuration
2. Scroll the MVR mode to enable or disable and Scroll to set all parameters.
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values
Figure 2-10: The MVR Configuration
www.ot-systems.com
119
Ver.1.0
Advertisement
Table of Contents
