2-9.2 Address Entry - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

2-9.2 Address Entry

This page provides address range settings used in IPMC profile.
The address entry is used to specify the address range that will be associated with IPMC
Profile. It is allowed to create at maximum 128 address entries in the system.
Web Interface
To configure the IPMC Profile Address Configuration in the web interface:
Figure 2-9.2: The IPMC Profile Address Configuration
Parameter description:
Delete
Check to delete the entry.
The designated entry will be deleted during the next save.
Entry Name
The name used for indexing the address entry table.
Each entry has the unique name which is composed of at maximun 16 alphabetic
and numeric characters. At least one alphabet must be present.
Start Address
The starting IPv4/IPv6 Multicast Group Address that will be used as an address
range.
End Address
The ending IPv4/IPv6 Multicast Group Address that will be used as an address
range.
Buttons
Add New Address (Range) Entry – Click to add new address range. Specify the
name and configure the addresses. Click "Save"
Apply – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
www.ot-systems.com
117
Ver.1.0