Table of Contents
Advertisement
ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.
3-11.3 EEE
By using EEE power savings can be achieved at the expense of traffic latency. This latency
occurs due to that the circuits EEE turn off to save power, need time to boot up before sending
traffic over the link. This time is called "wakeup time". To achieve minimal latency, devices can
use LLDP to exchange information about their respective tx and rx "wakeup time ", as a way to
agree upon the minimum wakeup time they need.
This page provides an overview of EEE information exchanged by LLDP.
Web Interface
To show LLDP EEE neighbors:
1. Click Monitor ,LLDP, then click EEE to show discover EEE devices
2. Click Refresh for manual update web screen
3. Click Auto-refresh for auto-update web screen
Figure 3-11.3: The LLDP Neighbors EEE information
Parameter description:
Local Port :
The port on which LLDP frames are received or transmitted.
Tx Tw :
The link partner's maximum time that transmit path can hold off sending data after
reassertion of LPI.
Rx Tw :
The link partner's time that receiver would like the transmitter to holdoff to allow time for the
receiver to wake from sleep.
Fallback Receive Tw :
The link partner's fallback receive Tw.
A receiving link partner may inform the transmitter of an alternate desired Tw_sys_tx. Since
a receiving link partner is likely to have discrete levels for savings, this provides the
transmitter with additional information that it may use for a more efficient allocation.
Systems that do not implement this option default the value to be the same as that of the
Receive Tw_sys_tx.
Echo Tx Tw :
The link partner's Echo Tx Tw value.
The respective echo values shall be defined as the local link partners reflection (echo) of the
www.ot-systems.com
If your network without any devices which enables
N
:
OTE
EEE function then the table will show "No LLDP EEE
information found".
290
Ver.1.0
Advertisement
Table of Contents
