3-14.3 Ip Subnet-Based Vlan - OTS ET42202M-S-PD User Manual

ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

3-14.3 IP Subnet-based VLAN

The page shows IP subnet-based VLAN entries. This page shows only static entries.
Web Interface
To Display MAC-based VLAN configuration in the web interface:
1. Click Monitor, VCL, IP Subnet-based VLAN.
2.
Checked "Auto-refresh".
3. Click "Refresh" to refresh the port detailed statistics.
Figure 3-18.3: The MAC-based VLAN Membership Status for User Static
Parameter description:
VCE ID :
Indicates the index of the entry. It is user configurable. It's value ranges from 0-128. If a VCE
ID is 0, application will auto-generate the VCE ID for that entry. Deletion and lookup of IP
subnet-based VLAN are based on VCE ID.
IP Address :
Indicates the IP address.
Mask Length :
Indicates the network mask length.
VLAN ID :
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
Port Members :
A row of check boxes for each port is displayed for each IP subnet-based VLAN entry. To
include a port in a IP subnet-based VLAN, check the box. To remove or exclude the port
from the IP subnet-based VLAN, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.
www.ot-systems.com
304
Ver.1.0