Accessible drives
6.3
Multibay 1
Ê Open the server (see chapter
Ê Remove the dummy cover from the mounting bay 3 (see section
of the bays" on page 41
page
43).
Ê Detach the EasyClick rails from the dummy cover by removing the four
screws on each side (see figure
I
Note that there are two M3 x 4,5mm screws with M3 thread and two
6-32 x 4,8mm screws with UNC thread on each side.
6.3.1
Equipping Multibay 1
Multibay 1 can be equipped with a ServerView Local Service Panel (LSP) or a
ServerView Local Service Display (LSD) and a DVD drive.
6.3.1.1
Installing LSP or LSD
Figure 22: ServerView Local Service Display (LSD) and ServerView Local Service Panel (LSP)
TX300 S5
"Preparation" on page
and section
"Removing the dummy cover" on
20 on page
Options Guide
23).
44).
Multibay 1
"Equipping
47