13.3.2 Closing The Server - Fujitsu PRIMERGY TX300 S5 Options Manual

Completion

13.3.2 Closing the server

Ê Open the locking lever.
Figure 97: Closing the server
Ê Place the housing cover on the server (1).
Ê Slide the housing cover in the direction of the arrow (2) until you feel the
locking lever click into place and the housing cover is flush with the housing.
Ê Press the housing cover against the housing and close the locking lever (3).
This pushes the housing cover forward and locks it in place.
TX300 S5
1
2
Options Guide
3
Rack model
131