Removing The Front Cover - Fujitsu PRIMERGY TX300 S5 Options Manual

Floorstand model
Ê If necessary, lay the server on its right-hand side.
Get a second person to help you do this. The server can weigh around 25 -
40 kg (depending on the configuration).
Make sure that the server feet protrude over the table edge.
3
Figure 2: Removing the side cover
Ê Pull the locking lever as far as it will go (1).
This pushes the side cover backward (2).
Ê Remove the side cover (3).
4.1.2

Removing the front cover

Remove the front cover when making the following extensions and upgrades:
– Installation of further accessible drives
– Conversion from a floorstand model to a rack model
24
1
Options Guide
Preparation
2
TX300 S5