Installing An Expansion Card - Fujitsu PRIMERGY TX300 S5 Options Manual

Installing an expansion card

I
For more information see the Technical Manual of the system board
D2619.
7.1 Installing an expansion card
Ê Open the server (see chapter
Figure 41: Removing the slot cover
Ê Open the slot locking bar in the direction of the arrow (1).
Ê Remove the slot locking bar.
Ê Remove the slot cover (2).
V
CAUTION!
Keep the slot cover in a safe place. If you remove the expansion card
again and do not replace it with a new one, then reinstall the slot cover
to comply with EMC regulations and to satisfy cooling requirements and
fire protection measures.
66
"Preparation" on page
1
Options Guide
Expansion cards
23).
2
TX300 S5