Fujitsu PRIMERGY TX300 S5 Options Manual page 11

Preface
Trusted Platform Module (TPM)
A Trusted Platform Module (TPM) for safer storage of keys can be implemented
as an option. This module enables programs from third party manufacturers to
store key information (e.g. drive encryption using Windows Bitlocker Drive
Encryption).
The TPM is activated via the BIOS system (for more information, refer to the
Fujitsu Technology Solutions BIOS manual).
V
CAUTION!
– When using the TPM, note the program descriptions provided by the
third party manufacturers.
– You must also create a backup of the TPM content. To do this, follow
the third party manufacturer's instructions. Without this backup, if the
TPM or the system board is faulty you will not be able to access your
data.
– If a failure occurs, please inform your service about the TPM
activation before it takes any action, and be prepared to provide them
with your backup copies of the TPM content.
Additional accessible drives
The server has three 3.5-inch bays.
You can use these bays as follows:
– You can equip the individual bays with DVD drives or magnetic tape drives.
– You can install the Multibay 1 in the bottom bay. The Multibay 1 has bays for
a Slimline DVD drive and the ServerView Local Service Panel (LSP) or the
ServerView Local Service Display (LSD).
– In the two lower bays, you can install the Multibay 2. The Multibay 2 has bays
for two additional 3.5-inch hard disk drives, a Slimline DVD drive and the
ServerView Local Service Panel (LSP) or the ServerView Local Service
Display (LSD).
– You can install the Multibay 1 in the bottom bay (see above) and the
expansion box for 2.5-inch SAS hard disk drives in the two upper bays.
TX300 S5
Expansions and conversions
Options Guide 11