Installing The Multibay - Fujitsu PRIMERGY TX200 S6 Options Manual

Accessible drives and LSD/LSP
7.3

Installing the multibay

The multibay can be equipped with a slimline DVD and a ServerView Local
Service Panel (LSP) or a ServerView Local Service Display (LSD).
Ê Open the server as described in the
Ê Remove the dummy cover from one 5.25-inch bay for accessible drives (see
figure 22 on page
Ê Detach the EasyClick rails from the dummy cover by removing the four
screws on each side (see
V
CAUTION!
Keep the dummy cover for future use. If you remove the multibay again
and do not replace it with a new drive, the dummy cover must be
reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire safety protection measures.
Installing LSP or LSD in the multibay
Figure 27: ServerView Local Service Display (LSD) and ServerView Local Service Panel (LSP)
58
54).
figure 23 on page
Options Guide
chapter "Preparation" on page
55).
27.
TX200 S6