Accessible drives and LSD/LSP
7.3
Multibay 1
Ê Open the server and remove the the front cover or the rack front cover as
described in the
Ê Remove the dummy cover from the bay 3 (see
bays" on page 54
Ê Detach the EasyClick rails from the dummy cover by removing the four
screws on each side (see
I
Note that there are two M3 x 4,5mm screws with M3 thread and two
6-32 x 4,8mm screws with UNC thread on each side.
7.3.1
Equipping Multibay 1
Multibay 1 can be equipped with a ServerView Local Service Panel (LSP) or a
ServerView Local Service Display (LSD) and a DVD drive.
7.3.1.1
Installing LSP or LSD
Figure 29: ServerView Local Service Display (LSD) and ServerView Local Service Panel (LSP)
TX300 S6
chapter "Preparation" on page
and
section "Removing the dummy cover" on page
figure 27 on page
Options Guide
27.
section "Equipping of the
57).
Multibay 1
56).
59