Fujitsu PRIMERGY TX300 S5 Options Manual page 85

Figure 58: Securing the TPM module
Ê Place the TPM module onto the system board (1).
Ê Secure the TPM module with the special screw for the TPM (2).
Please use the TPM screwdriver insert bit to tighten the special screw.
I
Do not fasten the screw too tightly.
Ê Install the hot-plug power supply unit in its slot again (see operating
instructions).
Ê Close the server (see chapter
power outlet, and switch it on.
TX300 S5
2
1
"Completion" on page
Options Guide
Trusted Platform Module (TPM)
123), connect it to the
85