Parts List; Introduction; M2488 Models And Options - Fujitsu m2488 User Manual

M2488 USER'S GUIDE
7-1

INTRODUCTION

Chapter 7 provides parts information on the M2488 Cartridge Tape Drive and optional equipment as
described in the following paragraphs:

7-2 M2488 MODELS AND OPTIONS

7-2 M2488 MODELS AND OPTIONS
Table 7-1 describes the M2488 Cartridge Tape Drive models available. The Description column
describes all equipment that is included in that model/part number. Table 7-2 describes the optional
equipment available for use with the M2488 Cartridge Tape Drive.
MODEL
M2488C Cartridge Tape Drive
M2488CA Cartridge Tape Drive
M2488CF Cartridge Tape Drive
** All models are FJ Standard color.
Any of the IPMs listed in Table 7-2 may be used with the models listed in this table.
MODEL
M2488A31 IPM 1Kit
M2488A32 IPM 2 Kit
M2488A33 IPM 3Kit
M2488A34 IPM 4Kit
M2488A41 Support Base
April 1997
CHAPTER 7

PARTS LIST

Table 7-1. M2488 Models
PART NUMBER
CA01311-B002
CA01311-B020
CA01311-B030
Table 7-2. Optional Equipment
PART NUMBER
CA01311-K031 IPM - Fast/Wide Single-ended
Terminator
CA01311-K032 IPM - Fast/Wide Differential
Terminator
CA01311-K033 IPM - Narrow Single-ended
Terminator
CA01311-K034 IPM - Narrow Differential
Terminator
CA01311-K041 ACL Standard Option for 10 CTG Magazine (Models
M2488CA1 through CA4)
CG00000-011403 REV. A
DESCRIPTION **
Desktop drive
Requires one of options M2488A31 through A34, see
Table 7-2.
Desktop drive
ACL
Requires one of options M2488A31 through A34, see
Table 7-2.
Desktop drive
FACL
Requires one of options M2488A31 through A34, see
Table 7-2.
DESCRIPTION
PARTS LIST
7-1