Table of Contents
Advertisement
M2488 USER'S GUIDE
3-3
AUTOMATIC CARTRIDGE LOADER CONTROLS AND INDICATORS
(OPTIONAL EQUIPMENT)
Figure 3-4 through Figure 3-6 and Table 3-4 through Table 3-6 illustrate and describe the controls and
indicators on the Automatic Cartridge Loader (ACL).
3-3.1
ACL Front Panel Controls and Indicators
Figure 3-4 and Table 3-4 illustrate and describe the front panel of the ACL.
3
1
2
MAGAZINE
START
SYSTEM
AUTO
EJECT
MODE SEL.
16
17
FIGURE AND
INDEX NO.
3-4
1
Magazine Position Indicator
2
SYSTEM LED
3
MAGAZINE START LED
4
SEL LED
5
ATTN LED
6
Cartridge slot/magazine slot
7
Tape Position LEDs
April 1997
5
4
ATTN.
BOT
SEL.
COMP.
SHIFT
15
14
Figure 3-4. ACL Front Panel Controls and Indicators
Table 3-4. ACL Front Panel Controls and Indicators
CONTROLS AND
INDICATORS
CG00000-011403 REV. A
CONTROLS AND INDICATORS
6
TEST
START
12
13
11
DESCRIPTION
Displays numbers and letters to indicate magazine positions
or state of the ACL.
Illuminates to indicate the ACL is in the SYSTEM mode.
Illuminates when a magazine is installed in the ACL and the
START pushbutton has been pressed.
Illuminates when the tape drive is selected on the SCSI bus.
When a mount/demount message is received from the host
system, the ATTN LED blinks to prompt the operator to
mount the cartridge/magazine.
Holds a 5 or 10-cartridge magazine or provides an opening
to manually insert a cartridge.
Indicates tape position between BOT and EOT. Lights illu-
minate sequentially in the forward direction (wrap 1) and
turn off sequentially in the reverse direction (wrap 2).
7
EOT
UNLOAD
RESET
9
10
8
3-5
Advertisement
Table of Contents
