Operating Procedures; Introduction; Tape Cartridge Functions; 5-2.1 Tape Cartridge File Protection - Fujitsu m2488 User Manual

Cartridge tape drive
Hide thumbs Also See for m2488:
Table of Contents

Advertisement

M2488 USER'S GUIDE
5-1

INTRODUCTION

This chapter provides information on the following subject areas:

5-2 TAPE CARTRIDGE FUNCTIONS

5-3 POWER ON SEQUENCE
5-4 M2488 TAPE DRIVE OPERATION
5-5 MEDIUM CHANGER MAGAZINE PROCEDURES
5-6 MEDIUM CHANGER OPERATING MODES
5-7 OPERATOR PANEL MESSAGES
5-8 MEDIUM CHANGER MESSAGES
5-9 ACL OPERATING INSTRUCTIONS
5-10 FACL OPERATING INSTRUCTIONS
5-2
TAPE CARTRIDGE FUNCTIONS
Tape cartridges may be loaded manually, or automatically using an ACL or a FACL. Use the proce-
dures which apply to your equipment. The cleaning cartridge has an identification notch.
Cartridges are capable of 15,000 mount operations, but periodic replacement is recommended.
5-2.1
Tape Cartridge File Protection
See Figure 5-1 for location of the File Protect Selector.
1. To protect files and inhibit a data write, turn the File Protect Selector until the white circle is visi-
ble and centered.
2. To enable a data write, turn the File Protect Selector to a position where the white circle is no
longer visible.
5-2.2
Tape Cartridge Labeling
See Figure 5-1 for location of the label.
April 1997
CHAPTER 5

OPERATING PROCEDURES

Label
Leader Block
Side A
File Protect Selector

Figure 5-1. Tape Cartridge

CG00000-011403 REV. A
OPERATING PROCEDURES
Side B
5-1

Advertisement

Table of Contents
loading

Table of Contents