Table of Contents
Advertisement
M2488 USER'S GUIDE
5-7.5
Check Messages
This type of message is displayed when a drive error is detected and requires operator intervention.
The messages either contain CHK with a hexadecimal error code or indicates that the operator has
made an error. Refer to Section 6-4 ERROR RECOVERY.
5-7.6
Ozone Messages
This type of message is displayed where a drive error is detected. The scrolling message contains
OZONE NNNNNNN and text describing the error. Refer to Section 6-4 ERROR RECOVERY.
5-8
MEDIUM CHANGER MESSAGES
5-8.1
Position Indicator
The following messages are displayed on the Position Indicator of the Medium Changer operator
panel.
INDICATION
(unlit)
number
-
A
C
E
F
H
April 1997
DESCRIPTION
Magazine is not mounted.
Value indicates the magazine position.
Magazine is mounted, START has not been pressed.
Autoloader is operating:
1. power turned on with a magazine mounted.
2. magazine stopped for loading or ejecting.
Cleaning tape is running.
Indicates autoloader is in error status. This may indicate the
magazine position in case of a feed or return error.
Magazine has been ejected and is ready to replace.
Cartridge was inserted manually without using a magazine.
CG00000-011403 REV. A
OPERATING PROCEDURES
5-7
Advertisement
Table of Contents
