Table of Contents
Advertisement
M2488 USER'S GUIDE
5-9.3
Eject the ACL Magazine
STEP
ACTION
1
Press RESET. The MAGAZINE START LED turns off and
played.
2
If a cartridge is loaded, press UNLOAD. The cartridge is returned to the magazine.
3
Press EJECT.
4
When the position indicator changes to
5-9.4
ACL Auto Mode Operation
STEP
ACTION
1
The first cartridge is loaded and the tape is positioned at BOT. The drive enters the ready state.
When the LOAD UNLOAD command is issued
2
azine. The next cartridge is automatically loaded.
a. The tape cartridge may be unloaded manually by pressing RESET, then UNLOAD.
5-9.5
ACL System Mode Operation
STEP
ACTION
N
1
2
ACL operation is controlled by the SCSI medium changer commands.
3
When the next LOAD UNLOAD command is issued, the tape cartridge is ejected and stored in the
magazine.
4
When MOVE MEDIUM command is issued, the desired cartridge is loaded.
5-9.6
ACL Hand Mode Operation
STEP
ACTION
1
Insert the cartridge directly into the cartridge entry slot on the tape drive.
2
When the cartridge is inserted, the position indicator displays an
3
Push in the cartridge until it stops.
4
Continue with the Step 2 of the procedure for loading a tape cartridge without the ACL in paragraph
5-4.1.
5
The tape cartridge is unloaded using one of the methods described in paragraph 5-4.3.
April 1997
EJECTING
is displayed while the magazine moves up.
is displayed.
CG00000-011403 REV. A
OPERATING PROCEDURES
NT RDYU
F
, remove the magazine by the handle.
a
, the tape cartridge is ejected and stored in the mag-
H
.
NT RDYF
OR
is dis-
5-9
Advertisement
Table of Contents
