Table of Contents
Advertisement
OPERATING PROCEDURES
5-10
FACL OPERATING INSTRUCTIONS
The FACL is shown in Figure 5-6. Its operation is presented in the following paragraphs.
5-10.1
Open and Close FACL Door
To open the spring-loaded door, press PUSH. If the door does not open, press down on the lock tab
(side panel) and open the door.
To close the door, press PUSH.
5-10.2
Select the FACL Mode
After selecting the mode with this procedure, only use the procedures for that mode.
STEP
ACTION
Press MODE SEL. until the AUTO LED illuminates for the auto mode, the SYSTEM LED illumi-
1
nates for the system mode or the MANUAL LED illuminates for the manual mode.
5-10.3
Mount the FACL Magazine
Refer to Figure 5-7.
STEP
ACTION
1
Open the door (see paragraph 5-10.1) and press PUSH on the magazine loading section. The mount-
ing tray moves forward.
2
Hold the magazine handle and insert the magazine into the mounting tray.
3
Press PUSH on the mounting tray until the device locks into the FACL.
4
Close the door (see paragraph 5-10.1).
5-10
lock tab
Figure 5-6. FACL
CG00000-011403 REV. A
M2488 USER'S GUIDE
April 1997
Advertisement
Table of Contents
