Rd Party Cti; Requirements - NEC univerge sv8100 Installation Manual

rd
3 Party CTI

Requirements

Following are the minimum specifications required to use 3
type of TAPI application will be used, it may be necessary to use a Windows Server. The 3rd
Party TSP is installed on to the PC acting as the TAPI server. Some TAPI applications take
responsibility for the communications between their application and the TAPI server. Other
applications need to have the TAPI enabled on each PC. If TAPI has to be enabled on client
PC's then a Windows Server operating system is required. If TAPI communications is
handled by the TAPI application then any of the operating listed below can be used.
Telephone System
SV8100
PC
Operating
System
CPU
Memory
Network Card
Note: The above are the specification for TAPI set-up only. They may differ when you install an application.
*Note 1: Only Server Operating systems can provide TAPI sharing and have to be used in a Domain environment.
A dedicated PC Server is strongly recommended for the SV8100 CTI Server.
Virtual environments are supported.
The setup requires you to be logged onto the PC Server as a Local Administrator. The server
should be connected to the network via the TCP/IP Protocol (Including WINS, DNS services),
and should include the appropriate number of Client Access Licenses. An IT Administrator is
normally required during the installation.
Running version 8 or above software and a TCPIP connection to
either the CCPU or the IPLA/B
Windows Server 2000 Server SP4 (32Bit Only)
Windows Server 2003 SP2 (32Bit Only)
Windows Server 2008 (32 / 64 Bit)
Windows 2000 Professional SP4 (32 Bit Only) *Note 1
Windows XP Professional Min SP2 (32 Bit Only) * Note 1
Windows Vista Business, Ultimate, Enterprise (32 Bit Only) *Note 1
Windows 7 Business, Ultimate, Enterprise (32 and 64 Bit) *Note1
Windows 8 Professional, Windows 8 Enterprise (32/64 Bit) *Note1
Windows Small Business Server 2003 (32 Bit Only) *Note1
Windows Small Business Server 2008 (64 Bit Only) *Note1
Windows Small Business Server 2011 (64 Bit Only) *Note1
Windows Server 2012 (64 Bit Only) *Note1
2.5GHZ
1GB
Using TCP/IP (Including WINS, DNS services),
st
Party CTI. Depending on what