Furuno DS-60 Installation Manual page 23

8. Use the tightening handle (option) to fasten the fixing gland (6) from the inside of
the tank (2).
The distance between the bottom of the fixing gland (6) and tank must be less than
15 mm.
Fixing gland
Transducer tank, sectional view
9. Rotate the fixing flange (4) twice horizontally to make two loops.
These loops make it easy to put the cable in the tank.
10. Use the bolt M10x25 (9) and spring washer M10 (10) to fasten the fixing flange (4)
to the tank (2).
Transducer cable
less than 15 mm
Rotate the fixing flange (4) twice horizontally
to make two loops on the cable.
M10 spring washer (10)
M10x25 hex. bolt (9)
1. INSTALLATION
Tank
1-17