5) Attach the metal fixing (supplied) to the connector, and use two bolts M6x20
and spring washers M6 to fix them.
Hex. bolt (M6x20)
Spring washer
(M6)
11. Pass the fixing gland (6), washer (7) and gasket (8) through the transducer cable
(DS-631: cable assy), and slide them to the white line on the cable.
12. Pass the cable through the hole at the top of the tank (2).
Cable assy.
Metal fixing
Transducer cable
Tank (2)
Gasket (8)
Washer (7)
(The hollow side must be upward.)
Fixing gland (6)
White line
(printed on the cable)
1. INSTALLATION
1-9