Furuno DS-60 Installation Manual page 22

1. INSTALLATION
3) Attach the metal fixing (supplied) to the connector, and use two bolts M620
and spring washers M6 unfastened at step 1) to fix them.
6. Pass the fixing gland (6), washer (7) and gasket (8) through the transducer cable
(DS-631A: cable assy), and slide them to the white line on the cable.
7. Pass the cable through the hole at the top of the tank (2).
1-16
Hex. bolt (M6x20)
Spring washer
(M6)
Transducer cable
Gasket (8)
Washer (7)
(The hollow side must be upward.)
Fixing gland (6)
White line
(printed on the cable)
Cable assy.
Metal fixing
Tank (2)