Cold Start; Double Map Button (Te) - Husqvarna TE 250 - 310 2011 I.E. Specifications - Operation - Maintenance

COLD START

For engine cold starting, the motorcycle features a lever (1) on
the left-hand side of the handlebar. Pull the lever to open the
starting device, vice versa to close it.

DOUBLE MAP BUTTON (TE)

NOTE:
The button (1) works with full power motorcycles only.
The button (1) allows to modify motorcycle's performance;
After motorcycle starting, wait for the engine to warm up, then
press the button (1) to toggle through "RACE MAP I" standard
performance to "RACE MAP II" slippery ground performance.
After you switch off the motorcycle, the configuration goes back
to "RACE MAP I" upon the first start-up.
1
TC-TXCi
TE
1
1
EN - 11