Installation Procedure - Gestetner B147 Service Manual

FAX UNIT

Installation Procedure


CAUTION
Before installing this option, do the following:
1. If there is a printer option in the machine, print out all data in the printer
buffer.
2. Press the operation switch to be the standby mode. Make sure the
power LED is not lit then, turn off the main switch and disconnect the
power cord and the network cable.
1. Remove the option cover [A]
( x 2).
2. Turn the battery switch on [B].
3. Install the fax unit [C] ( x 2).
4. Attach the serial number decal [D] on
the rear cover.
5. Attach the FCC decal on the rear
cover (only for USA/Canada).
6. Remove the key cover [E] and install
one of the fax keys [F].
7. Remove the panel cover [G] and
install the fax panel [H].
B603
[B]
[D]
[F]
[E]
4
B603I911.WMF
[C]
[H]
B603I902.WMF
[A]
[G]
SM