Sp7-Xxx (Data Log) - Gestetner B147 Service Manual

SP7-XXX (Data Log)

7-001 Working Time
The number of prints and drive time for drum revolutions can be obtained by counting
the main motor revolution time. If the amount of time required for the drum to revolve
to print 1 copy increases, this data combined with the number of copies can be used
to analyze problems and could be useful for future product development.
7-002 [Original Counter]
Displays the total original count (number of originals fed) for the selected mode.
7-002-1 Total
7-002-2 Copy
7-002-3 Fax
7-002-4 Doc. Svr. Application
7-002-5 Scanner
7-002-6 Others
7-003 [Print Counter] Meter Charge Counter
(Print, Development)
Displays the values of the color counters.
7-003-1 Total Count
7-003-2 Copy: B&W
7-003-4 Copy: Full Color
7-003-5 FAX: B&W
7-003-7 Print: B&W
7-003-8 Print: Full Color
7-003-10 Development: CMY
7-003-11 Development: K
7-003-12 Copy: Single Color
7-003-13 Copy: Twin Color
7-003-20 Total: Full Color
7-003-21 Total: B&W Single
7-003-22 Total: Single
7-003-23 Total: B&W
7-003-24 Copy: Full Color
7-003-25 Print: Full Color
7-003-26 Copy: Color
7-003-27 Copy: B/W
7-003-28 Print: Color
7-003-29 Print: B&W
7-003-30 Total: Color Total
7-007 [Other Counter]
Displays counter values.
7-007-1 Duplex
7-007-2 A3/DLT
7-007-3 Staple
7-101 [Print Count–Paper Size] Paper Size Counter
Displays the counter values for each paper size.
7-101-5 A4 LEF
SM
*BCU Display: 00000000~99999999 min
*CTL
*CTL [ -9999 to 9999999 / 0 / 1/step ]
*CTL These SP modes are development counters for
the meter charge mode.
*CTL Displays the values of the color counters.
*CTL These SP modes are used for Japanese
market only.
*CTL This SP mode is print counters for the meter
charge mode.
*CTL These SP modes are used for Japanese
market only.
*CTL These SP modes are print counters for the
meter charge mode.
*CTL [ 0 to 9999999 / 0 / 1 sheet/step ]
*CTL [ 0 to 9999999 / 0 / 1 sheet/step ]
5-67
COPY SERVICE MODE
B147/B149/B190