Fax Sc Code And Error Messages; Sc871 Fcu Flash Rom Abnormal; Fcu Flash Rom Access Limit Exceeded; Sram Abnormal - Gestetner B147 Service Manual

FAX SC CODE AND ERROR MESSAGES

2.2 FAX SC CODE AND ERROR MESSAGES

SC871 FCU Flash ROM Abnormal

Message: Flash ROM error.
Quick Dial Table is Unavailable
Please call service.
The flash ROM mounted in the fax unit where the address book is stored has been
detected as abnormal.
• Replace the FCU.

FCU Flash ROM Access Limit Exceeded

Message: Flash ROM replacement is now
necessary for the Quick Dial Table.
The access limit of the flash ROM mounted in the fax unit has exceeded the limit.
You can continue to use the machine after this error occurs.
• Replace the FCU.

SRAM Abnormal

Message: Functional problems with facsimile.
Data will be initialized.
This message may appear immediately after the fax unit is installed, or when the
SRAM (backup RAM) is detected abnormal.
On this message screen:
• Initialize SRAM.
• Set the SRAM backup switch to ON.

Expansion SRAM Abnormal

Message: Some data will be deleted by installing Fax Memory Board.
Will you continue to install it? If you want to cancel, turn main power switch
off and take the Board out.
This message may appear immediately after installation of the Function Upgrade
Kit, or when the SRAM (backup RAM) is detected abnormal.
On this message screen:
• Initialize the expansion SRAM
• For the Function Upgrade Kit, set the backup switch to ON.
B603 22 SM