Feed To Two-Tray Finisher And Booklet Finisher - Gestetner B147 Service Manual

DUPLEX UNIT

6.10.6 FEED TO TWO-TRAY FINISHER AND BOOKLET FINISHER

With Optional One-Tray Paper Feed Unit
[B]
[D]
[A]
[D]
[C]
B146D559.WMF
B146D558.WMF
The paper is fed out to the finisher from the upper exit [A].
The junction gate [B] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [C] is activated, the machine waits
until the trailing edge has passed junction mylar 1 [D]. Then, the paper is switched
back and junction mylar 1 directs the paper out to the finisher.
With Optional LCT or Two-Tray Paper Feed Unit
[B]
[A]
[D]
[D]
[E]
[C]
B146D561.WMF B146D560.WMF
The paper is fed out to the finisher from the lower exit [A].
The junction gate [B] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [C] is activated, the machine waits
until the trailing edge has passed junction mylar 2 [D], but before it passes junction
mylar 3 [E]. Then, the paper is switched back and junction mylar 2 directs the
paper out to the finisher.
SM 6-79 B147/B149/B190