Energy Saver Modes - Gestetner B147 Service Manual

6.12.7 ENERGY SAVER MODES

Overview
Operation Sw. Off
-or-
Auto Off Timer
(1 mni. to 240 min. / Default: 60 min.)
Operation Sw. Off
-or-
Auto Off Timer
(1 mni. to 240 min. / Default: 60 min.)
Operation Sw. Off
-or-
Auto Off Timer
(1 mni. to 240 min. / Default: 60 min.)
When the machine is not being used, the energy saver function reduces power
consumption by decreasing the fusing temperature.
This machine has two types of energy saver mode as follows.
1) Panel-off mode
2) Auto Off mode
These modes are controlled by the following UP and SP modes.
• Panel off timer: User Tools – System Settings – Timer Setting – Panel Off
Timer
• Auto off timer: User Tools – System Settings – Timer Setting – Auto Off
Timer
• Auto off disabling: User Tools – System Settings – Key Operator Tools –
AOF (Always ON). This disables the auto off mode.
SM
Stand-by Mode
Energy Saver Key ON
-or-
Panel Off Timer (10 s to 999 s / Default: 10 s)
Panel-Off Mode (1&2)
Energy Saver Timer
(1min. to 240 min. / Default: 15 min.)
Low Power Mode
Auto Off Mode
Off Mode
FAX: RX, etc.
After Printing
Printer Data in
Off Stand-by Mode
6-97
Key Operation
Return Time Less Than 3s Panel-Off Level 1
Return Time Less Than 10s Panel-Off Level 2
Key Operation
Return Time Less Than 30 s
Operation Sw. On
Platen Cover Open / Close
Original Set ADF
Return Time Less Than 101 s
B147/B149/B190
FUSING
B146D936.WMF