Replacement And Adjustment; Detaching The Tray From The Mainframe; Rear Fence Hp Sensor - Gestetner B147 Service Manual

1. REPLACEMENT AND ADJUSTMENT

1.1 DETACHING THE TRAY FROM THE MAINFRAME

1. To draw the tray out, press the
stopper [A] on the guide rail.
2. To install the tray, set the tray on the
guide rails, keep the tray level, and
push the tray in.

1.2 REAR FENCE HP SENSOR

1. Pull out the large capacity tray.
2. Left tray rear side fence [A] ( x 2)
3. Rear fence bracket [B] ( x 1)
4. Connector of the rear fence HP
sensor [C]
5. Rear fence HP sensor [D] ( x 1)
SM
DETACHING THE TRAY FROM THE MAINFRAME
[B]
[C]
[D]
1
[A]
B600R101.WMF
B600R102.WMF
B600
[A]