Installation Procedure - Gestetner G060 Service Manual

Rev. 6/2001

Installation Procedure


CAUTION
Switch off the main machine and unplug its power cord. If the two-tray
finisher is installed, disconnect it and pull it away from the machine.
1. Unpack the punch unit and remove all tape and shipping retainers.
2. Open the front door and remove the rear cover [A] ( x 4).
3. Remove the bracket [B] ( x 2) and paper guide [C] ( x 1).
SM
[A]
B377I102.WMF
[C]
1-9
OPTIONAL UNIT INSTALLATION
B377I103.WMF
[B]
G060