Junction Gates - Gestetner B147 Service Manual

JUNCTION GATES

4.3 JUNCTION GATES
The two junction gates can direct paper to three destinations.
In sort/stack mode for tray 1, the tray junction
solenoid [A] is on, and the prints go to the upper exit
(tray 1 is at the upper exit for sort/stack mode).
In sort/stack mode for tray 2, both the tray junction gate
solenoid [A] and stapler junction gate solenoid [B] are
off, and prints go to the lower exit.
In staple mode, the tray junction solenoid [A] is off and
the stapler junction gate solenoid [B] is on, and prints go
to the stapler tray.
B599
[A]
[A]
16
B599D205.WMF
B599D206.WMF
[B]
B599D207.WMF
[B]
[A]
SM