GREAT PLANES ULTRA SPORT 46 Instruction Manual page 22

18. Make an L-bend in the end of the throttle pushrod.
19. Plug the throttle servo into the receiver. Switch on the
transmitter and then the receiver. Center the throttle stick
and install a servo arm so that it is perpendicular to the
centerline of the servo.
20. Insert the L-bend into the servo arm and secure with
a FasLink.
21. With the transmitter and receiver switched on and the
throttle stick centered, position the throttle servo so that the
throttle barrel is open approximately ½ way.
22. Mount the throttle servo tray.
23. Check that the throttle barrel opens and closes
completely without binding. Use the end point adjustment
on your transmitter, adjust the clevis or change the location
of the FasLink on the servo arm to fi ne tune the throttle
control. We recommend that a throttle cut be set up on the
transmitter so that the engine can be stopped with a switch.
22