Assemble The Fuselage; Install The Tail - GREAT PLANES ULTRA SPORT 46 Instruction Manual

12. Insert the wires into the screw lock connectors, switch
on the transmitter, plug the servo into the receiver into the
channel you prefer for the retracts and switch on the receiver.
13. Position the servo arm so that the retracts are
retracted and secure the servo arm on the servo. Tighten
the two set screws in the screw lock connectors. Check
that the retracts lock in the up and the down positions with
no binding of the servo.

ASSEMBLE THE FUSELAGE

Install the Tail

1. Install the wing.
2. Remove the temporary vertical fi n spacer.
3. Temporarily install the horizontal stabilizer.
4. Temporarily install the vertical fi n.
5. Check the alignment of the horizontal stabilizer. The
distance from the center of the nose of the fuselage to the
tips of the horizontal stabilizer should be equal.
12