GREAT PLANES ULTRA SPORT 46 Instruction Manual page 15

4. Make a hook and loop strap.
5. Install the strap.
6. Wrap the receiver and receiver battery in foam and
secure them to the radio tray with the hook and loop strap
and cut off the excess strap.
7. Connect the receiver battery to the receiver switch.
Plug in the receiver switch, rudder servo and elevator servo
into the receiver.
8. Switch on the transmitter, then the receiver. Center
the rudder and elevator trims on the transmitter. Position
the servo arms so they are perpendicular to the centerline
of the servos.
9. Assemble a rudder and an elevator pushrod.
10. Insert one of the pushrods in the fuselage for the
elevator.
11. Attach a clevis to the control horn.
15